HKS - SUPER FILTER 200MM DRY 3 LAYERS (GREEN)
 
|
|
HKS Super Power Flow Intake Filter Replacement 200mm. It is part #70001-AK022.HKS replacement Filter Elements are available in a dry 3-layer, triple density or wet 2-layer, dual density construction. The dry 3-layer type is standard in SMF Reloaded Intake kits, and is designed for superior filtration while still providing excellent airflow. The wet 2-layer type is included in Racing Suction kits and is focused on maximizing airflow for performance, yet still keeping harmful particles from the engine. If your vehicle is in a high dust area, HKS recommends using dry 3-layer elements.
How to change the SUPER POWER FLOW Filter(4 steps)
1. Take the filter out of the frame.
Release the frame bolt first and take out the filter from the frame.
2. Change the filter.
First take the used filterout. Then put the new filter into the frame as shownon the photo by pushing it hardand set it for the center hol.
3. Be careful not to make a gap.
Set the filter tight to the frame. Do not try it a once but put it by step by step carefully. Try not to make any wrinkle.
4. Finally set the bolt.
Put the filter in the frame tightly and set the bolt firmly. Make sure again there is no gap between the filter and the frame.
* Approximate change period:
Dry type: after 6 to 12 months, or drive 6,000km to 10,000km
Wet type: after 3 to 6 months, or drive 3,000km to 5,000km
Related Products
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
