Directions
- * Remove dust or dirt from the windshield with water in advance.
- 1. Take the cap off and apply it on a dry windshield. Press the side of the bottle to let the fluid out and rub it firmly onto the windshield without splashing the fluid.
- * Do not apply it on wet windshield otherwise it may cause damage to the surface.
- 2. After drying for 5-10 minutes, wipe it off with a slightly damp towel which is wrung out.
Even though it takes more time and effort than other products, the results make it well worth it, guaranteed to improve your comfortable and safe visibility.
1.Apply as soon as you remove the cap.
The felt on top the bottle helps you apply it easily as soon as you take the cap off, without getting your hand dirty.
2.Apply carefully and evenly.
If there are areas that go uncoated, rain won't be repelled evenly. Apply the coating all the way to the very corners, being sure not to miss any areas.
We recommend that you use the long-type for minivans, station wagons, and other large-sized vehicles.
Our "Glaco Roll on Long Type" , which has a 200mm length bottle, helps you to easily clean even a large-sized vehicle's windshield. It allows you to fully coat even on the corners of the windshield.
3.Wipe off after the surface gets dry and whitens.
If you try to wipe off the surface before it is fully dry, the coating will be spread unevenly, providing inconsistent results and decreasing the water repellency.
4.Fully wipe off with a moist towel.
A dry towel won't be able to wipe it off fully. Continue to use a clean surface of a moist towel, leaving no unwiped areas.
As you can see, the water repellence is amazing. It causes the rain drops to bounce right off your windshield, blown away by the wind pressure. It even allows you to drive in the rain without wipers at speeds of 45km/h or more. Even when driving within city limits, this water repellency will help provide you with a clear field of vision.
